Tover Uniqua / Self Linking High Traffic Floor Lacquer 

Tover Uniqua / Self Linking High Traffic Floor Lacquer

• 100% polyurethane, high performance, water based floor lacquer

• Self-linking technology, fume free and non yellowing, clear finish

• Suitable for sealing extremely high traffic wood floors & furniture

• It will cover up to to 14 sq meters per 1L, easy to use and apply

• It will penetrate the wood fully & it will harden up inside the wood

• High resistance to abrasion, scratches, chemicals and high heels

• The best floor lacquer for high commercial traffic wooden floors

Tover Uniqua / Self Linking High Traffic Floor Lacquer  – Why Uniqua

Tover Uniqua Polyurethane Floor Lacquer is a well known wood sealer for sport rooms, halls, school floors, pubs, restaurants, airports, high traffic domestic floors & others. This product is manufactured with the finest quality polyurethane components, it is designed to be anti slip and it does not change/alter the look of the original wood. Its self-linking system is activated by water evaporation, it highly improves particle bonding creating a film with exceptional long lasting durability. A product that will satisfy even the most demanding user.

Tover Uniqua / Self Linking High Traffic Floor Lacquer  – Where to use

A very high traffic commercial & industrial strength water based floor lacquer compatible with all types of wooden floors, wooden furniture, wooden doors, etc. It keeps the original wood appearance without creating an artificial glazing. Suitable for indoor use only, built in anti slip technology, 100% fume free, it can be used with a hardener as well to make it compatible with an oil based wood stain & non yellowing finish. The sealer has no colour. Available in matt sheen, semi gloss sheen, gloss sheen & nature sheen. Tover Uniqua / Self Linking High Traffic Floor Lacquer  is highly popular with the floor sanding and floor refinishing industry. It has a higher coverage area than most lacquers, it dries fast, it provides unequalled resistance to abrasion, scratches, high heels, traffic & chemicals.

Tover Uniqua / Self Linking High Traffic Floor Lacquer  – How to use

You need to start with surface preparation. This water based floor lacquer is 100% clear so any imperfections on your wood base will be fully visible under the lacquer. You can use the amazing Tover Uniqua / Self Linking High Traffic Floor Lacquer  as an overcoat over pre-existing finishes (assuming that the pre-existing surface is clean & in good shape) or it can be used as the main sealer. Sand the wood surface with rough to fine sandpaper to remove all scratches, patches & older finishes. Vacuum the surface well a number of times to get rid of even the finest grain of dust. At this stage you need to decide if you want to use a clear or a coloured primer or if you just want to seal the wood with Uniqua. Using a small varnishing brush apply a thick coat of lacquer around the edges & around all narrow areas. Using a quality varnishing roller start applying lacquer all over the larger surface always going along the fibre of the wood. Apply enough lacquer until the wood is filled and stops absorbing it. Allow 2 hours to dry, re-sand the whole floor with very fine sandpaper, usually 120 grit to 180 grit, vacuum the floor well & apply the last coat. If the surface was sanded well and if the lacquer was applied well, two coats is more than enough to have your floors fully protected, smooth and natural looking.

To achieve a beautiful finish on wooden floors you need to use proper sealers and top quality sanding equipment. Try the new Tover Uniqua / Self Linking High Traffic Floor Lacquer today.

Tover Uniqua / Self Linking High Traffic Floor Lacquer