Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM

Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM

• Proper quality aluminium oxide sanding belts from Karbosan

• Compatible with most 200 mm belt floor sanders

• Suitable for removing old sealers, adhesive, waxes, polish

• Grits available: 40, 60, 80, 120 & 120, for all types of sanding

• Much more durable than similar products from other brands

• Highly popular with the professional floor sanding industry

• Sold in packs of 10 belts, blue colour, very affordable belts

Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM – Why Karbosan

Over the past number of years we have sold a number of brands of sanding belts. While some were great, they were a bit too expensive. The cheapest ones were not very durable. But then we discovered Karbosan sanding belts and now we can truly say that we have found the best. The new Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM are designed for heavy duty commercial use, are well priced and are manufactured from the finest quality aluminium oxide. You are sure to work faster, cheaper and better with our Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM

Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM – Where to use

Heavy duty residential, commercial and industrial sanding belts from Karbosan. Suitable for sanding and refinishing all types of hardwood floors and engineered wooden floors. Suitable for removing all types of water based and solvent based lacquers, floor sealers, hardwax oils, polishes, adhesive, glue, levelling wood surfaces & other uses. Many floor sanding companies also sand decking with our sanding belts. A proper heavy duty sanding belt that will fit all 200 mm belt sanders from all brands of floor sanding equipment.

Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM – How to use

Our sanding belts start from 40 grit and go up to 120 grit. The roughest grit is usually suitable for removing heavy duty lacquers, sealers, waxes, etc. The finest grit is usually suitable for fine sanding and overcoating sanding. So if you are planning to sand an already sealed wood floor, you should start with a 40 grit sanding belt. Sand the whole floor going along the fibre of the wood. Then go with 60 grit one more time and then with 80 grit. Now you are ready for applying the first coat of sealer.

40 grit sanding belts | rough floor sanding and old sealers removal

60 grit sanding belts | light sanding and surface preparation

80 grit sanding belts | fine sanding and final surface preparation

100 grit sanding belts | very fine sanding for recoating or sanding between the coats

Assess the wood surface and only proceed with the sanding after you are 100% sure that the most appropriate sanding belt was selected. If you are starting the first sanding with a too fine sanding belt, you might have to go over many times before the sealer is removed. You might as well start with a rougher sanding belt and achieve great results in one go.

We are happy to deal with domestic DIY users or professional floor sanding contractors. Our expertise and all our experience is at your disposal. If you are not sure how to do it or what sanding paper is the best, please call us or email us.

Karbosan Zirconia Blue Sanding Belts 200 MM x 750 MM