Chimiver Velurex Re-Pair Lack | Wood Floor Polish

Chimiver Velurex Re-Pair Lack | Wood Floor Polish

• Extraordinary heavy duty polyurethane water based wood floor refresher & restorer

• Compatible with all lacquered and varnished wood floors, lino, vinyl, LVT and PVC

• The product will level up dull patches, it will fill up small scratches and glaze the floor

• Its finish is 100% clear, anti slip and suitable for commercial and residential polishing

• Fume free, water based, non yellowing, easy to apply, it can be burnished, low cost

• To be applied to a dry, residue free and deep cleaned lacquered or varnished wood floor

• It can be applied with a flat mopping system, a normal mop or a special applicator

• 1 L will cover around 20-50 sq meters depending on the floor porosity | absorbency

• A unique product that restores old and damaged wood floor to a like new condition

• It increases the floor sheen levels and it builds up a protective layer over the sealer

• This product is highly appreciated by the floor cleaning and floor refinishing industry

• Eco-friendly, sold in a plastic bottle made from recycled components and materials

• The new Chimiver Velurex Re-Pair Lack | Wood Floor Polish is suitable for indoor use

Chimiver Velurex Re-Pair Lack | Wood Floor Polish | Why Use It

Old and neglected wooden floors can lose their sheen and can be exposed to water damage and chemical reactions. If your wooden floor looks dull and patchy but there is still some sealant left on it, then you can use the new Chimiver Velurex Re-Pair Lack | Wood Floor Polish to reglaze the floor and rebuild the protection on it. The product is extraordinarily durable, easy to use and it can transform an old and damaged wood floor into a spectacular looking floor. The product is manufactured from top quality polyurethane resins and is a product unique in its class. Do not spend a huge amount of money on a large floor sanding or floor refurbishment project before you have tried the new Chimiver Velurex Re-Pair Lack | Wood Floor Polish.

Chimiver Velurex Re-Pair Lack | Wood Floor Polish | Where To Use It

Its main job is to restore and repair lacquered and varnished wooden floors and wooden furniture. But it can also be used on lino floors, vinyl floors, LVT floors, PVC floors and some laminate floors. It can be used on all indoor wooden floors and wooden surfaces that were sealed with a water based or a solvent based floor lacquer | varnish. The product is easy to apply and it does not require special tools or training to be used. As long as the surface is dry and residue free, you can use the new Chimiver Velurex Re-Pair Lack | Wood Floor Polish to repair it or seal it. This product is basically a diluted floor lacquer so it provides pretty much the same advantages that come with a glossy floor lacquer. Highly popular with the professional floor cleaning and floor restoration trade but also with the DIY market.

Chimiver Velurex Re-Pair Lack | Wood Floor Polish | How To Use It

This is not a floor lacquer so it cannot be used directly on raw wood surfaces. The surface has to be already varnished | lacquered and in need of a refreshment or a repair.

1. Deep clean the surface to make sure that there is no grease, fats or oils on it

2. Make sure the surface is dry before applying this professional wood floor polish gloss

3. Using a flat mopping system apply a thin coat of floor polish and allow 1 hour to dry

4. A second coat is also possible but not necessary in most cases

5. The job is completed, Do not walk on the floor for about 2 hours

When sealing large commercial wood floors you can seal individual areas. While the floor is drying there cannot be any traffic on it. Do not apply more than two coats of sealer. If more sheen is required, burnishing the floor with a white floor pad will increase the sheen levels. Apply thin coats of wood floor polish moving along with the fiber of the wood. Do not dilute the product before use.

Chimiver Velurex Re-Pair Lack | Wood Floor Polish | Recommendations

To fully benefit from the advantages provided by this spectacular product please respect the application routine. Do not use the product on oiled wood floors. Do not use the product over wet or damp wood surfaces. Use a flat mopping system if you want to make the product even more cost effective. Work in well ventilated areas to make sure that the drying periods are reduced dramatically. Store the product safely in a cold and dark place.

Chimiver Velurex Re-Pair Lack | Wood Floor Polish