Chimiver Ecofill Tech | Water Based Gap Filler 

56,40 Price incl. VAT: 69,37

Chimiver Ecofill Tech | Highly Effective, Highly Flexible And Very Affordable Professional Gap Filler From Chimiver. Compatible With All Types Of Hardwood & Semi Solid Wood Floors

Out of stock

Chimiver Ecofill Tech | Water Based Gap Filler

 

  • Non toxic, fume free, acrylic based gap filler from Chimiver

  • Compatible with all hardwood and semi solid wooden floors

  • Highly flexible, quick drying, high coverage and natural finish

  • To be mixed up with wood dust from the floor itself

  • The product is suitable for professional use and DIY use

  • The coverage area can depend on the size & the number of gaps

  • One of the most affordable & cost effective gap fillers in Ireland

  • Estimated drying time is anywhere between 1 to 2 hours (+-)

  • Gaps up to 0.5 cm can be filled | compatible with parquet floors

  • The surface has to be sealant free or new | Sanding required

  • The gap filler can be stained, waxed, oiled, varnished or painted

 

Chimiver Ecofill Tech | Water Based Gap Filler | Why Use It

 

Filling up the gaps between floorboards or parquet tiles is a great way of preventing dirt from depositing inside the gaps, to stop draught or to enhance the look of your floors. Gaps of up to 0.5 cm can be easily filled with the new Chimiver Ecofill Tech | Water Based Gap Filler. This product is fume free, non yellowing, quick drying and very flexible. It can be successfully used to fill up gaps on parquet floors, semi solid & hardwood floors, wood furniture, wood doors, frames, etc. The product will sand up nicely and it can be sealed with the same sealer used to seal the wood surface.

 

Chimiver Ecofill Tech | Water Based Gap Filler | Where To Use It

 

This professional water based gap filler is suitable for all kinds of indoor wood gap filling. It can be used to fill up gaps between floorboards, cracks on wood floors, gaps on wooden staircases, gaps on wooden furniture and all other types of gaps & cracks on all wooden surfaces. It can be applied on vertical and horizontal surfaces. The product is 100% fume free, it dries within 1-2 hours and if it was applied right and mixed up correctly, it will dry up to look like the floorboard itself. The product is listed as “eco” so it can be used to fill up gaps or cracks on wooden worktops and areas where food is being served or prepared. Gaps up to 0.5 cm can be filled with the new Chimiver Ecofill Tech | Water Based Gap Filler but smaller the gaps, longer life expectancy for the gap filler.

 

Chimiver Ecofill Tech | Water Based Gap Filler | How To Use It

 

The most important thing before starting filling up gaps is to make sure that you have enough product to complete the whole process, that you have all the tools required and you have prepared the surface correctly.

 

  1. The manufacturer recommends a coverage area of 12-20 sq meters per 1L of wood gap filler but that will only be the case if you are dealing with small gaps. Larger the gaps, more product will be required. When filling large gaps, we recommend to budget for about 5 sq meters per 1L

  2. Tools : you need a container big enough to fit 5L of gap filler, some tool to mix it up, an application tool and fine sanding paper

  3. The surface has to be sealant free, clean & residue free. Any pre-existing finishes have to be removed in full before the gap filler is applied to the surface.

 

Pour some gap filler into the container and add a bit of wood dust. Make sure to use wood dust from the floor itself if you are planning to end up with gaps looking like the floor. Create a thick composition and do a sample test. If the gap filler attaches nicely to the gaps, you have the right composition. If the composition is too  wet or too dry, add some more gap filler or some more wood dust to make it perfect. Using the applicator, apply enough gap filler to the whole area until the gaps look overfilled by 10%. Allow the filler to dry for 1-2 hours and proceed to the final sanding. The surface has to be sanded one more time with 80 grit sanding paper to remove all gap filler excess and create a perfect smooth surface. In some cases, a second gap filling operation might be required. Assess the end results and if it looks like some gaps have sunken too much, apply more gap filler to level up the imperfection. The dry gap filler can be waxed, oiled, varnished & painted as the floor itself.

 

Chimiver Ecofill Tech | Water Based Gap Filler | Durability

 

How long will it last? Hard to say. The durability of any gap filler depends on a number of factors like, the thickness of the gap filler, the level of traffic, the type of usage, floorboard flexibility and floorboard movement. Some floors expand and retract due to humidity. No flooring company can guarantee you x amount of time.

 

Chimiver Ecofill Tech | Water Based Gap Filler | Recommendations

 

Only mix up what you need to use within 1-2 hours. Any gap filler unused within 1-2 hours will harden up. Do not mix up the new Chimiver Ecofill Tech | Water Based Gap Filler with any other type or brand of gap fillers. Do not walk on the surface while it dries and only proceed to the final sanding after the gap filler has dried in full. Do not drop heavy items on the floor after the floor is completed. You do not need any special training to use the new Chimiver Ecofill Tech | Water Based Gap Filler, but a bit of common sense is required. Always follow the manufacturers safety and application guidelines.

 

Chimiver Ecofill Tech | Water Based Gap Filler

Brand

Chimiver

Reviews

There are no reviews yet.

Be the first to review “Chimiver Ecofill Tech | Water Based Gap Filler ”